TOP

Products

RP & S GUARD CARTRIDGE COLUMN

SunShell Guard Cartridge Column

ss_GardFilter

Characteristic

  • The cartridge column is packed with SunShell C18 (RP) and Core shell silica (S) into a cartridge sized 3 x 2 mm i.d.
  • RP guard cartridge is used for all reversed phases and S guard cartridge for hilic phases.
  • Low dead volume structure
  • Upper pressure limit is more than 60 Mpa
  • Availablr for 2.1 mm i.d. to 4.6 mm i.d. columns

Influence on the chromatogram

ss_GardFilter

Please see the catalog for prices and other details (pdf)

catalog

SunShell RP Guard Filter

RP_GardFilter

Characteristic

  • Monolithic glass filter with a uniform pore diameter (φ: 4mm, t: 4mm) to join the C18
  • Such as the removal of increased prevention and adsorption of the pressure caused by the contaminants, it can be used as a guard column for reverse phase
  • Easy replacement in the cartridge type is
  • Low dead volume specification, including the holder (1% of the decrease in the number of stages in the 4.6x150mm column)
  • Can be used in inner diameter 2.1mm ~ 4.6mm column
  • SunShell RP Guard pressure loss of Filter is about 0.1MPa at 1mL / min, also Guard Filter the breakdown voltage of the body is 60MPa
  • It is universally available to reverse phase column other than SunShell
  • Sharp peak shape basic compound with no tailing also such as amitriptyline

Comparison of before and after installation of the SunShell RP Guard Filter


GardFilter比較

Lineup

(available as a guard column for reversed phase because of C18 bonded)

Model Name Content
CBGAKN SunShell RP
Guard Filter
Starter kit
SUS holder @1
C18Filter @1
Piping (one tube, two press screws, two ferrule) 1 set
set
CBGAAC SunShell RP
Guard Filter
C18 filter for exchange
C18 filter for exchange @5 set
CBGAAH SunShell RP
Guard Filter
Holder
SUS holder @1 set
PCO50K Connection Kit SUS tube (o.d. 1/16 ", i.d. 0.13mm, length 50mm) 1 present
SUS press screw @2
PEEK ferrule @2
set
PF192X PEEK ferrule o.d. 1/16 "for the ferrule @10
The breakdown voltage performance of 62MPa (9,000psi) in combination with SUS press screw
set

Sunniest GuardCartridge

Sunniest_GardFilter

特徴

  • Simple structure
  • Low dead volume
  • Easy replacement in the cartridge type is
  • After the guard cartridge column connection is no decrease in the number of plate
  • It can also be used to 3μm of the column not only 5μm
  • Easy installation (1/4 rotation by hand tightening after spanner put orient the cartridge into the holder)

Comparison of before and after installation of the Sunniest GuardCartridge


GardCartrige比較

Lineup

GardCartrige
Name Particle size Model
Sunniest C18, 5 mm
Guard cartridge column
(1-pak + Holder) 4 x 10 mm
5 µm EB3A1H
Sunniest RP-AQUA, 5 mm
Guard cartridge column
(1-pak + Holder) 4 x 10 mm
5 µm ER3A1H
Sunniest C8, 5 mm
Guard cartridge column
(1-pak + Holder ) 4 x 10 mm
5 µm EC3A1H
Sunniest C18, 5 mm
Guard cartridge
(4-pak) 4 x 10 mm
5 µm EB3A1C
Sunniest RP-AQUA, 5 mm
Guard cartridge
(4-pak) 4 x 10 mm
5 µm ER3A1C
Sunniest C8, 5 mm
Guard cartridge
(4-pak) 4 x 10 mm
5 µm EC3A1C
Sunniest
Guard cartridge holder
4 x 10 mm
--- HOLA1C